Do headlights NEED breathers?

[NoodleFace]

To expand on gold94corolla, if you can, light both projectors one above the other to get a direct comparison. Just make sure you don't cross beams...

[NoodleFace]

Thank you very much. These definitely need a clear head and a mug of coffee.

[NoodleFace]

Ok so looks like trial and error it is going to be unfortunately. But I still have a couple of unanswered questions if you guys may. Would a volumetrically...

[NoodleFace]

Ok so I took the hint and went to browse some of the older threads on here taking about vents. But I can't really tell if everyone agreed on a certain...

[NoodleFace]

Ok, so how about a bi-LED projector. Would it still require auto leveling and washers? Any decent bi-LED should outperform that Hella halogen projector....

[NoodleFace]

Helpful link you posted. So as pictured above one of the 9005/9006 connectors is going to your ballast and the other for your projector. The one...

[NoodleFace]

For suggestions on which setup to go with I'd leave it to someone with more experience than me to answer. But if it were mine here's what I'd do. I'd...

[NoodleFace]

Your last paragraph there almost made me change my mind. I still want to go ahead with it for science Also because I'd be combining ruined headlights...

[NoodleFace]

The link shows amp>d2s adapters. That adapter is installed between your bulb and your ballast.

What I was referring to earlier is not...

[NoodleFace]

Since yours are HID then it's simple. Assuming your truck came with H13 halogens, your friend probably used a splitter to convert the single plug (that...

[NoodleFace]

Ok does really look like you have them act opposite to what they are supposed to. Your high beam terminals going to the projector's solenoid terminals...

[NoodleFace]

I found this
http://forums.turbobricks.com/showthread.php?t=318235

Guy with a 240 like yours put bixenon projectors behind the stock...

[NoodleFace]

first things first. Fog lights would turn off with your selector stalk on high beam.

I suggest you confirm it's not your eyes playing tricks...

[NoodleFace]

Are you sure your low beam projector is H1 and the high beam is an H7 in a reflector? What's the model of your car, I'm interested to know.
...

[NoodleFace]

Your attachment isn't visible.
Upload to imgur and set to hidden then, using imgur's desktop website, click on the image you want to share> click...

[NoodleFace]

But we already know a headlight housing that's not sealed properly will show condensation on the inside of the front lens. Wouldn't a breach in the housing...

[NoodleFace]

Well I took a look at your first link (missed it at first) and looks like the OEM headlight has a fresnel lens. Projector output through that fresnel...

[NoodleFace]

Do headlights really need breathers. Those rubbery nob-like pieces on the back of the housing. What would happen if they didn't exist and the housing...

[NoodleFace]

I'm not sure what universal headlights are, sealed beam headlights maybe. Regardless, since you said your old headlights are caput then your starting...

[NoodleFace]

Mine actually does that but only when I stand in front of the car at less than a metre away. Basically if I am close enough the stock bezel piece that...