Announcement

Collapse
No announcement yet.

2010 Suzuki Swift + Mazda CX-5 LED projector

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • 2010 Suzuki Swift + Mazda CX-5 LED projector

    Compasion this LED vs HID vs Halogen.



    Cut aluminium bracket of projector.


    Because bottom attachment point is cutted, i'm simple fixed low beam projector in bracket




    Fitting in headlights




    Halogen reflector replaced by aliminium bracket 3mm thickness


    i'm marked hole and cutting sheet








    In back i'm place H4 male connector for default wiring


    Wiring in headligth body


    I'm place halogen reflector on braket and marked cut-off


    LED projector aiming at same marks


    Double check - place reflector in headlight body.


    LED projector is perfect aiming


    Assembled LED module for replace halogen reflector






    I'm cutting solid surface for better air cooling


    Aiming with spacers




    View from replace bulb hole


    On mating surfaces put thermo sealant




    Default mask from Mazda CX-5 does not cover radiator




    I'm use office folder for creating full cover mask












    a place for led driver


    inside hedlight before glass installation





    Not usual retrofits: TLC 200, FF mk3, Avensis, Prius, Note, Note #2, Swift LED

    i teach english with google translate

  • #2
    Wow. Seriously impressive impressive work!

    2015 Ford Party ST | 2013 Triumph Street Triple | Dr. LS460R: 227 built to date!

    Comment


    • #3
      I second that! Nice going

      Comment


      • #4
        Nice!


        Sent from my iPhone using Tapatalk

        ---------------------------------------------------------------------------

        Too lazy to browse HK45's mega-long output shot comparison thread?

        Try the HIDP Projector Output Comparison App!

        Comment


        • #5
          Outstanding work!

          Comment


          • #6
            This is impressive!

            Sent from my Nexus 5 using Tapatalk

            Comment


            • #7
              Great bracket fabrication
              *CLICK BELOW ON WHAT YOU WANT TO SEE*

              2014 Nissan Sentra Quads w/ XB Fogs

              DSC_9349 by Sam Colt, on Flickr

              Comment


              • #8
                Wow great work! That chopped up plastic folder is brilliant.

                Comment


                • #9
                  Headlight on car





                  Reflection on headlight mask not blink oncoming traffic










                  High beam is very aggressive blinking






                  Park light - i'm not cut plastic folder for paking bulb, and philips led w5w 6000k shines through the lens.


                  Low beam cut-off


                  High beam


                  Compasion with my headlights with modded AL Bosch Projector at fixed exposure.

                  focal length 16mm




                  Width
                  focal length 16mm




                  High beam
                  focal length 40mm




                  Low beam
                  focal length 40mm




                  City light
                  focal length 40mm



                  Not usual retrofits: TLC 200, FF mk3, Avensis, Prius, Note, Note #2, Swift LED

                  i teach english with google translate

                  Comment


                  • #10
                    Slight lose of distance but the Mazda CX-5 LED has nice output and a lovely color temperature. Looks good

                    Comment


                    • #11
                      Great job! This is one of the best cleanest retros for a LED projector I've seen.

                      Any before/after lux measurements?
                      www.automotiveLEDresearch.com

                      Comment


                      • #12
                        Wow. Very clean both outside and inside. Projector mounted look tailor made even for the headlight too.

                        Although Call me nitpicking. Having seen retrofit in swift even with shrouds the projector look small due to big reflector and here due to high beam no shroud can be used obviously. Thus black color of projector body in chrome bezel making it look a little hollow IMO. and black bezel could have solved that. Black on white color swift looks great. Although would have not looked oem as this one.

                        That being said, I do not mean the current setup look bad in anyway but thats just my opinion.
                        Love current setup and output too. Esply h4 socket mounted looks oem , this will help me to change mine similar way.
                        My feedback thread
                        https://www.hidplanet.com/forums/for...for-mayurhuria

                        Comment


                        • #13
                          Originally posted by evo77 View Post
                          Great job! This is one of the best cleanest retros for a LED projector I've seen. Any before/after lux measurements?
                          not have luxmeter, only compasion pics in other topic

                          electrical:
                          low beam - 1A @ 13,9V
                          high beam - 1,9A @ 13,9V

                          in theory on led chip (nichia) only 1500lm with this consumption
                          Not usual retrofits: TLC 200, FF mk3, Avensis, Prius, Note, Note #2, Swift LED

                          i teach english with google translate

                          Comment


                          • #14
                            Very nice work. I wonder where i can get these Led modules?

                            Comment


                            • #15
                              Yup, awesome job. Slowly convincing me to the led side

                              Comment

                              Working...
                              X