Announcement

Collapse
No announcement yet.

New OEM Bixenon Headlight Assembly - Bad Cutoff

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • mnb22
    replied
    these are valeo headlight that use a projector similar to the one posted in the below thread or some hella projector can't really remember, Believe it or not this is how they switch it to RHD. there is a metal clip on the right side of the projector that pushes a metal shield upwards causing this shadow in the high beam mode and also affect the low beam.
    if you can't do it yourself take it to the dealer and ask them to fix unless you are in a RHD country this should not be a problem

    https://www.hidplanet.com/forums/for...is-it-any-good
    Last edited by mnb22; March 21st, 2018, 05:24 PM.

    Leave a comment:


  • gold94corolla
    replied
    Never seen anything like that before in my life

    Leave a comment:


  • Zac.
    replied
    I know how dealers are, I work for one. We only use OEM parts to replace broken units. Quality parts.

    Did you check bulb alignment or the outside of the headlight to see if itís an OEM headlight or that the bulb is in there correctly?

    Leave a comment:


  • evo77
    replied
    What car is this?

    And can you look at the lens of the headlamp (very bottom edge) and find the manufacturer name on it? Such as Koito, Valeo, etc.

    Chances are, to save money they gave you an aftermarket crappy headlamp that looks like original but performs like poo.

    Leave a comment:


  • Jared Dela Cruz
    started a topic New OEM Bixenon Headlight Assembly - Bad Cutoff

    New OEM Bixenon Headlight Assembly - Bad Cutoff

    Got into an accident and dealer replaced the whole headlight assembly. Got the car back but the cutoff is sooo bad.

    I'd like to be more informed before I take this back to them so that I know what to tell them so this can be fixed right. You guys know how dealers are...

    https://flic.kr/p/24i4caJ
    https://flic.kr/p/FHp6T6
Working...
X