Announcement

Collapse
No announcement yet.

Help powering/using LED projectors pls

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Help powering/using LED projectors pls

    Hello, I have some OEM LED projectors from a Kia Forte. I don’t know anything about LED projectors as far as using them without blowing them up. I have access to all the electrical diagrams & to the vehicle itself too if something is needed.

    I’m assuming all that is needed is 1 and 5 for low beam, 2 and 8 for high beam? Do these just go into power and ground on a relay harness as if this was an HID retrofit?
    https://imgur.com/a/94aWLsr
    Originally posted by gold94corolla
    it gets you all the b*tches
Working...
X