2009 dodge dakota with mini h1 projectors and ccfl halos

[TheBLC84]

I had someone that was going to help me wire this up with an HID kit and now he is bailing on me... I have no idea how to wire these things up. Can someone try to explain it to me? or if you live close to columbia SC I will pay you to come install them for me.

[Michelin Man]

Did you get a wiring harness?

It is fairly straightforward, in fact there is plenty of PnP install videos on youtube which should help you wire up the ballasts.

If you don't have a harness you'll need to do some wiring of your own.

[TheBLC84]

yea I have a wiring harness

[Michelin Man]

Pretty much with the relay harnesses you have the main power wire with a fuse which is connected to the positive terminal of the battery.

Then you have the trigger connector which connects to one of the factory bulb connectors.

Then you have 9006 style outputs that connect to the ballasts. Depending on how they're made they may have a ground lead on each connector which must be grounded properly.

Next, if its a Bi-xenon harness you will have the 9006/'HID' connector the for high beam solenoid.

If you have a separate high beam you will need a splitter.